Prof. Dr. Yusuf ŞAHİN

Head of Department

E-mail: yusuf​.s​ahin@ostimteknik.edu.tr  

• PhD : Aston University
• MSc : Gazi University
• BSc : Gazi University

He was born in 1954 in Kırşehir. He completed his Bachelor's degree in 1977 and his Master's degree in 1988 at Gazi University, Ankara. In 1995, with the support of the Council of Higher Education (YOK), he completed his PhD research at Aston University, Department of Mechanical Engineering (UK) on the development of metal matrix composites and improvement of their mechanical and wear behavior.

He became Assistant Professor at Gazi University, Faculty of Technical Education, Department of Mechanical Education in 1995, Associate Professor in 1996 and Professor at Gazi University in 2002. He gave lectures at the Military Academy and Atılım University Mechanical Engineering Department. In 2011, he transferred to Gazi University Faculty of Technology, Department of Manufacturing Engineering. In 2013, he conducted research at Virginia Polytechnic University as a Visiting Professor. On March 8, 2015, he continued his studies for more than a year as a Research Professor at the Department of Mechanical, Construction and Manufacturing Engineering (Soete Lab.) at Ghent University, Belgium. ​

In 2018, he retired from Gazi University. Prof. Şahin was appointed to the Department of Mechanical Engineering at Near East University in 2018. On August 17, 2020, he moved to Nişantaşı University Department of Mechanical Engineering. He successfully completed the project titled “Production of hybrid composites by VARTIM method and improvement of mechanical properties”. Mechanical Engineering department won “Mechanical Test Lab./Composite Production Lab.” Stanford University announced the top 2 percent of the world's scientists. Prof. Şahin managed to be included in the list of “The World's Most Influential Scientists”, which was created by taking into account the “1996-2020 Studies”. He also served as the Conference chairman at the “6th International / 7th International Engineering, Technology and Management Congress” Online conference organized in Istanbul in 2021 and 2022. On September 27, 2022, he left his post.

Prof. Sahin joined the Department of Mechanical Engineering at OSTIM Technical University on October 7, 2022. His area of expertise consists of Machine Tools, Chip Removal Technology, Wear/Friction, Manufacturing Processes, Powder Metallurgy, Experimental Design and Analysis as well as ANN methods. He has presented papers in National and International Symposiums and published more than 160 original articles in well-known foreign journals. In addition, he has a total of 5 published books. 

YÖK AKADEMİ   GOOGLE SCHOLAR LinkedIN

Prof. Dr. D​emiral AKBAR 

E-mail: demiral.akbar@ostimteknik.edu.tr 

• PhD : Middle East Technical University
• MSc : Mosul University
• BSc : Mosul University

Prof. Demiral AKBAR completed his Bachelor's (1993) and Master's (1996) degrees in the field of Plasma and High Energy Physics. In 2006, he received his PhD in Plasma and High Energy Physics from METU. Prof. Akbar has been actively involved in developing and installing many renewable energy and storage systems for national and international companies. In addition, he contributed to many national and international projects: Turkish Accelerator Center Project (TAC), Ankara; Forschungszentrum Julich GmbH-Germany Research Center (TEXTOR); and the Helmholtz-Zentrum Dresden-ROSSENDORF (FEL-Free Electron Laser) are some of the centers where these projects are. Since 2019 he has participated in and integrated coordination teams of R&D projects in collaboration with the industry. The research activities have focused on the development of models to support decision-making, comparative analysis, and best practices of implementation in the scope of Life Cycle Engineering, Lean Manufacturing, and Industry 4.0. 

YÖK AKADEMİ   GOOGLE SCHOLAR LinkedIN

Prof. Dr. Birol KILKIŞ

E-mail: birol.kilkis@ostimteknik.edu.tr 

• PhD : Middle East Technical University
• MSc : Middle East Technical University / Von Karman Institute
• BSc : Middle East Technical University

Dr. Kilkis received his Ph.D. degree in Mechanical Engineering with high honors from Middle East Technical University and graduated in 1972 from von Karman Institute for Fluid Dynamics in Belgium with Honors. Dr. Kilkis has been working on heat transfer, unified heat transfer theory, high-performance buildings, quantum mechanics, fluid dynamics, heat pumps, energy strategies, hydrogen energy with renewable energy systems, hydrogen cities, 5th generation Net-zero exergy cities, district energy systems, aerodynamics, exergy analysis, combined heat and power, tri-generation, green airports, sustainable aviation, integrated solar PV systems, and energy simulations. He is the co-author of a most recent book on Cogeneration with Renewables. In total, he has published more than 600 papers in several journals and proceedings on a large variety of topics. Since 1972, he has been the principal investigator of several industrial projects, including a NATO Science for Stability project on a de-centralized, co-generating 1.5 MW fluidized-bed power plant. He had been a contractor to DOE, Morgantown Energy Technology Center in West Virginia twice on fluidized bed heat transfer modeling. Between 1998 and 1999, he acted as the project principal for snow melting systems for Air Force bases, heat tracing of fighter jet aircraft during freezing periods, and snow/ice melting of helicopter pads on Navy Vessels. He taught at METU, Gannon University and University of Missouri Rolla in the USA, and Baskent University. Currently he is the Regional Distinguished Lecturer of ASHRAE and the vice-chair, and WP 1 Leader in ETIP Renewable Heating and Cooling in the European Union, Brussels.

YÖK AKADEMİ   GOOGLE SCHOLAR LinkedIN

Prof. Dr. Halil Rıdvan ÖZ  

E-mail: halilridvan.oz@ostimteknik.edu.tr 

• PhD : Celal Bayar University
• MSc : Celal Bayar University
• BSc : Middle East Technical University

Prof. Dr. Halil Rıdvan ÖZ received his bachelor's degree from the department of mechanical engineering at Middle East Technical University in 1992, his master's and doctorate degrees in machine theory and dynamics field from Celal Bayar University in 1995 and 1999 respectively. He investigated nonlinear vibrations of curved beams and vibrations of axially moving continua in his graduate studies. He received his associate professor degree in 2000. He conducted research on mucus clearance in respiratory airways at UNR in USA with a TÜBİTAK NATO B1 scholarship. He stayed at the same university for 2 years and taught various courses. Later, he returned to Turkey and worked at Gaziantep, Fatih, Üsküdar, Istanbul Aydın and Iğdır universities, respectively. His research interests include mechanical vibrations, perturbation techniques, differential equations, nonlinear dynamics, finite element analysis, signal processing, artificial intelligence, non-Euclidean geometry, and university competence analysis. He worked as a principal investigator or researcher in TUBITAK, KOSGEB, ISTKA and BAP supported projects. He provided management and R&D consultancy to many companies. 

YÖK AKADEMİ   GOOGLE SCHOLAR LinkedIN

Prof. Dr. Hüsnü ÖZKAN  

E-mail: husnu.ozkan@ostimteknik.edu.tr 

• PhD : Marquette University
• MSc : Middle East Technical University
• BSc : Middle East Technical University

Graduated from Physics Department of the Middle East technical University (METU) in 1968. Received MS degree from the same department in 1971. Same year appointed research assistant at the Mechanical Engineering Department of Marquette University (USA) where, he enrolled for the Ph.D. programme. Carried out research studies at Chicago Üniversity and Argonne National Laboratory (USA), awarded Arthur J. Schmitt Foundation Grant for his research achievements. He has received Ph.D. degree from the Material Science Division of MU in 1975. Same year he returned to METU where, he was promoted to associate professor in 1981 and professor in 1989. During 1988-1990, he thought courses and carried out research at MU and at Saginaw Valley State University (SVSU-USA) as a Fulbright professor. Thought courses and carried out research studies during 1990, 1993 and 1999 summer terms at SVSU. At METU, he was a member of the Scientific Research Committee (BAP) and Micro and Nano Technology Graduate Program more than ten years. At the Physics Department, for a long time he was the chairman of the Solid-State Science Division and the Doctoral Committee. He studied the structural, mechanical and electromagnetic properties and their variations with temperature, pressure and radiations for the technologically important materials as the silicates, superconductors, ferromagnets and ultrahigh temperature ceramics. He has established XRD and Superconductivity Laboratories at the Physics Department and played active role for developing the Central Research Laboratory at METU. Thought numerous undergraduate and graduate courses, supervised many M.S and PhD. thesis and received several performance prices. Completed several research projects supported by the national (TÜBİTAK ve BAP) and international (NSF - USA, International Atomic Energy Agency - IAEA) institutions. Worked at METU until 2011, from 2011 to 2023 he was at Istanbul Aydin University (IAU). Appointed to the Engineering Faculty of Ostim Technical University February 2024. Published 77 scientific articles in high rated SCI journals in addition of the numerous national and international scientific conference presentations, His papers have been cited by about 1500 research articles and books. 

YÖK AKADEMİ   GOOGLE SCHOLAR

Prof. Dr. Harun BİLİRGEN

E-mail: harun.bilirgen@ostimteknik.edu.tr  

• PhD : Lehigh University
• MSc : Lehigh University
• BSc : 

Prof. Dr. Harun Bilirgen pursued his Master's and Doctoral studies at the Energy Research Center of Lehigh University in the USA. His research focused on experimental and numerical investigations of two-phase gas-particle flows in pneumatic conveying systems. He then carried out postdoctoral research in the Chemical Engineering Department at Lehigh University from 2000 to 2002.

From 2002 to 2013, he worked as a Principal Research Scientist at the Energy Research Center of Lehigh University's Mechanical Engineering Department. He conducted research on thermal efficiency enhancement, combustion and process optimization, emission reduction and compliance, CO2 capture and storage, waste heat/water recovery and integration of wastes into industrial facilities, algae production from waste water and flue gas using photo-bioreactors, coal drying and beneficiation, and design and optimization using CFD modeling. He served as project leader and team member in various applied projects in the US, Turkey, China, Mexico, and Canada. During his tenure at Lehigh University, he had the opportunity to present papers at numerous international conferences, publish articles, and obtain eight US patents.

In late 2013, with the intention of transferring the knowledge, know-how, and experience he had acquired abroad to his home country, Prof. Dr. Bilirgen returned to Turkey and founded an R&D company that specializes in energy and environmental technologies. The company has conducted applied R&D projects in Turkey, the US, Mexico, and Indonesia. 

In recent years, his work has focused on renewable energy, and he has been conducting TÜBİTAK-supported studies on the design and implementation of a micro-hydro turbine.

YÖK AKADEMİ   GOOGLE SCHOLAR LinkedIN

Prof. Dr. Kadir AYDIN

E-mail: kadir.aydin@ostimteknik.edu.tr

• PhD : Liverpool University
• MSc : Çukurova University
• BSc : Çukurova University

Prof. Dr. Kadir Aydın was born on 24 October 1962 in the town of Dereçine/Afyonkarahisar. He completed his primary, secondary and industrial vocational high school education in Akşehir/Konya. He subsequently obtained a Bachelor of Science (BSc) degree from Çukurova University's Mechanical Engineering Department in 1983, followed by a Master of Science (MSc) degree in 1986. In 1984, he assumed the role of Research Assistant at the Mechanical Engineering Department of Çukurova University. Following the completion of his MSc, he was appointed as a Lecturer in the same department in 1986. In 1988, he was awarded a scholarship by the YÖK to pursue a PhD in the field of Mechanical Engineering at the University of Liverpool, which he completed in 1993. He then served as Assistant Professor in the Department of Mechanical Engineering at Çukurova University between 1993-1995, Associate Professor between 1995-2001, Professor between 2001-2022, and Professor in the Department of Automotive Engineering at Çukurova University between 2022-2025. In 1998, he conducted research at the Technical Combustion Institute of the University of Hannover in Germany with a NATO scholarship. He voluntarily retired on 17 February 2025, and subsequently assumed the role of full-time Professor in the Department of Mechanical Engineering at Ostim Technical University.

In addition to his administrative duties in public institutions such as Çukurova University, TÜBİTAK, and TENMAK, Prof. Dr. Kadir Aydın served as the Chairman of the Board and General Manager of the Çukurova Technology Development Zone (Çukurova Teknokent) between 2013-2020. His research interests include, but are not limited to, the following: internal combustion engines, vehicle technology, combustion, hybrid and electric vehicles, alternative, renewable and green fuels (hydrogen, biodiesel, bioethanol, biogas, green methanol etc.) and additive/hybrid manufacturing. In addition to his registered patents, he has over 300 published national and international books, articles and papers. Furthermore, he has successfully completed numerous R&D projects, both nationally and internationally, that have received substantial support.

 GOOGLE SCHOLAR LinkedIN

Assist. Prof. Dr. Pelin Tören ÖZGÜN

E-mail: pelin.ozgun@ostimteknik.edu.tr

• PhD : İhsan Doğramacı Bilkent University
• MSc : 
• BSc : Izmir Institute of Technology

Pelin Tören Özgün (PTÖ) was born in Izmir. She graduated in 2005, from Izmir Atatürk High School (est. 1888), which is located in Izmir. PTÖ received her BSc degree with high honors from Chemical Engineering from Izmir Institute of Technology in 2011. Afterwards, she conducted her PhD studies on silicon-based optical microresonators for label-free biosensing applications. In 2016, she received her PhD degree from National Nanotechnology Research Center (UNAM) at Ihsan Dogramaci Bilkent University (Ankara, Türkiye), in Materials Science and Nanotechnology. Within the same year, she started working as a Post-Doctoral Researcher in Joanneum Research under Materials Institute - for Surface Technologies and Photonics - (Weiz, Austria). Following 2018, she continued working in Joanneum Research as a Research Associate until 2021. During her years in Joanneum Research, she contributed to the scientific research in various European Union projects, which mainly focused on the pilot-line development and production of disposable and polymer-based, fluidic in-vitro diagnostic (IVD) chips for DNA/protein detection purposes. One of those Horizon2020 projects (R2R Biofluidics) led by Joanneum Research, received Austrian Fast Forward award in 2018. In addition to that, with her co-workers, she published an article, which describes successfully the multiplexed DNA detection of the IVD chips produced via the pilot-line, in Lab on a Chip Journal (2020). The study was featured as „Inner Front Cover“ and high-lighted in Issue 22 of the journal. The same study received „Best Performance (Paper)“ award in the 10th Internal Joanneum Research Conference (i.e., „Zukunftskonferenz“) in Graz city in 2021. In September 2021, PTÖ returned back to home. Since June 2022, she has been working as an Assistant Professor in Ostim Technical University. PTÖ authored/co-authored ten scientific publications in high-ranking, international peer-reviewed journals. Among these scientific publications, there is also a review article on microresonators, which was published in Lab on a Chip Journal. To this day, PTÖ also attended leading national and international scientific conferences as a speaker. The research interests of PTÖ mainly focuses on Point-of-Care Diagnostic Systems, Lab-on-Chip Technologies, Biosensors, (Nano)Biomaterials, Biomedical Device Technologies, Photonic Sensors and Optical Microresonators.

YÖK AKADEMİ   GOOGLE SCHOLAR LinkedIN

Assist. Prof. Dr. Şafak NESLİ 

(Co-Head of Department)  

E-mail: safak.nesli@ostimteknik.edu.tr 

• PhD : Gazi University
• MSc : University of Greenwich
• BSc : Çukurova University

Dr. Şafak NESLİ received his B.S. degree in Mechanical Engineering at Çukurova University in 2014. He received his M.Sc. degree in Mechanical and Manufacturing Engineering at the University of Greenwich in 2016 with a thesis on Rapid Prototyping/manufacturing of Product Assemblies, and his Ph.D. degree with a thesis on Laser Polishing of Part Surfaces Produced by Additive Manufacturing in 2022 from Gazi University Mechanical Engineering. He also worked as a researcher at Gazi University in the field of Additive Manufacturing within the scope of YÖK 100/2000 Ph.D. project between 2017-2022. He took part as a researcher in many projects supported by TUBITAK and other organizations. His main research areas are additive manufacturing and laser polishing processes. 

YÖK AKADEMİ   GOOGLE SCHOLAR LinkedIN

Assist. Prof. Dr. Hikmet BAL  

E-mail: hikmet.bal@ostimteknik.edu.tr 

• PhD : Gazi University
• MSc : Gazi University
• BSc : Anadolu University / Gazi University

Dr. Hikmet Bal graduated with bachelor degree from Mechanical Engineering Department of Gazi University Engineering Faculty in 2002. He gained his MSc degree in 2006 in the same department with a study on vision system. In 2019, he received his PhD degree in Mechanical Dynamics and Theory field by his study on the vibration behavior of shaft-bearing systems from Mechanical Engineering Department of Gazi University. He gained a multidisciplinary work experience by working as a technical staff and project engineer on information technology systems and HVAC projects in government and private sector for a long time. He worked as a tactical unmanned air vehicle operating technical staff and expert engineer in government and private sector as well. He conducts research in the areas of multibody dynamics and vibration of mechanical system, vision system and signal processing, unmanned air vehicles.

YÖK AKADEMİ   GOOGLE SCHOLAR LinkedIN

Assist. Prof. Dr. Akif HACINECİPOĞLU  

E-mail: akif.hacinecipoglu@ostimteknik.edu.tr 

• PhD : Middle East Technical University
• MSc : Middle East Technical University
• BSc : Middle East Technical University

Dr. Akif Hacınecipoğlu received his B.S. degree in Mechanical Engineering at Middle East Technical University (METU) in 2009. After graduation, he worked as teaching and research assistant in the same department from 2010 until 2018. He received his M.Sc. degree with a thesis on development of a tele-operated semi-autonomous ground vehicle in 2012 and his Ph.D. degree with development of predictive human-aware navigation systems for mobile robots in 2019 from Mechanical Engineering department of METU. He founded Milvus Robotics Ltd in 2011 where, with his co-founders, he developed Turkey’s first autonomous mobile robots for material handling needs in factories and warehouses. He also worked as a researcher and project manager in different robotics projects funded by TUBITAK and various associations. His main research areas are robotics, robot vision, autonomous systems, path planning and navigation.

YÖK AKADEMİ   GOOGLE SCHOLAR LinkedIN

Assist. Prof. Dr. Besim BARANOĞLU

E-mail: besim.baranoglu@ostimteknik.edu.tr 

• PhD : Middle East Technical University
• MSc : Middle East Technical University
• BSc : Middle East Technical University

Dr. Besim Baranoğlu recieved his B.S. degree in Mechanical Engineering at METU (in 1994). He then completed his M.Sc. in the same department (and university) in 1996. Dr. Baranoğlu received his Ph.D. in Engineering Sciences Dept. of METU in 2003 with his thesis titled “The use of Dual Reciprocity Boundary Element Method in Thermoelasticity and Thermoviscoelasticity”. Dr. Baranoğlu joined Baskent University department of Industrial Engineering (and later transferred to Mechanical Engineering) in 2003. Within the year 2007 he started working with the Manufacturing Engineering Department of Atılım University. He assumed the positions of founding executive board member and later vice president of the executive board of Metal Forming Center of Excellence founded in Atılım University in 2010. He was assigned as the president of Metal Forming Center of Excellence in 2017. Dr. Baranoğlu founded the Novumek Engineering Ltd. in 2013 which later renamed as Novumek Technolgy Corp. in 2021. Dr. Baranoğlu joined the Mechanical Engineering Dept. of Ostim Technical University in 2022. He participated in many projects supported under TUBITAK (1001, 1005, 1007, 1501, 1507, 1505, 1707), KOSGEB, SANTEZ, SAYP, EU-7th Framework programme and IPA as project manager, researcher and consultant. Dr. Baranoğlu is currently an academic consultant with the Prota – Technology Production Workshop which is founded within the OSTIM Technopark. His research interest lie in the fields of numerical analysis (boundary element method and finite element method), mechanics of continuous media, manufacturing methods and simulation in manufacturing methods (esp. in metal forming).

YÖK AKADEMİ   GOOGLE SCHOLAR LinkedIN

 

Research Assist. Betül ASLAN

E-mail: betul.aslan@ostimteknik.edu.tr

• PhD : Gazi University
• MSc : Gazi University
• BSc : Cumhuriyet University

YÖK AKADEMİ   LinkedIN

Research Assist. Ekrem NUGAYOĞLU

E-mail: ​ekrem.nugayoglu@ostimteknik.edu.tr

• MSc : Ostim Technical University
• BSc : Selçuk University

YÖK AKADEMİ   LinkedIN

Research Assist. Muhammed ERCAN

E-mail: muhammed.ercan@ostimteknik.edu.tr

• MSc : Gazi University
• BSc : Selçuk University

YÖK AKADEMİ   LinkedIN

Prof. Dr. Yunus A. ÇENGEL 

E-mail: yunus.cengel@ostimteknik.edu.tr

• PhD : North Carolina State University, USA
• MSc : 
• BSc :  Istanbul Technical University

Yunus Çengel is Professor Emeritus at the University of Nevada, Reno, USA and the founding dean of the Faculty of Engineering at Adnan Menderes University in Aydin, Turkey. He received his Ph. D. in Mechanical Engineering from North Carolina State University in USA. Before joining ADU in 2012, he held the position of the Dean of the Faculty of Mechanical Engineering at Yildiz Technical University YTU and as Advisor to President at Scientific and Technological Research Council TUBITAK on international cooperations. He also served as the advisor to several government organizations and private companies on energy efficiency, energy policies, and education reform. Professor Çengel is the author or coauthor of the widely adopted textbooks such as Thermodynamics: An Engineering Approach, Fundamentals of Thermal-Fluid Sciences, Heat and Mass Transfer: Fundamentals and Applications, Fluid Mechanics: Fundamentals and Applications published by McGraw-Hill and translated into Chinese, Japanese, Korean, Thai, Spanish, Portuguese, Turkish, Italian, Greek, and French

 GOOGLE SCHOLAR

Prof. Dr. Cemal BASARAN

E-mail: cemal.basaran@ostimteknik.edu.tr

• PhD : 
• MSc : 
• BSc : 

Dr. Cemal Basaran is a Professor in the Dept. of Civil, Structural and Environmental Engineering at the University at Buffalo, The State University of New York.

He specializes in computational and theoretical mechanics. He has authored 160 + peer-reviewed journal publications, a textbook on the Unified Mechanics Theory, (second edition, 2023, ©Springer-Nature,) and several book chapters. His research focuses on the development of the Unified Mechanics Theory, which is the unification of the laws of Newton and the laws of thermodynamics at the ab-initio level. Some of his awards include the 1997 US Navy ONR Young Investigator Award, and the 2011 American Society of Mechanical Engineers (ASME) EEPD, Excellence in Mechanics Award. He is a Fellow of the ASME. He has served and continues to serve on the editorial board of many peer-reviewed international journals. He has been the primary dissertation advisor to 25 Ph.D. students. His research has been funded by National Science Foundation, US Navy, US Department of Defense, State of New York, and many industrial sponsors including but not limited to Intel, Motorola, Northrop Grumman, Raytheon, Delphi, DuPont, Texas Instruments, Micron, Tyco Electronics, Analog Devices, and many others. He serves as a research proposal reviewer to many national and international research funding agencies around the globe including but not limited to the UK, EU, France, China, Hong Kong, Saudi Arabia, Germany, Ireland, Austria, and many others.

GOOGLE SCHOLAR LinkedIN

Assist. Prof. Dr. Yahya KARA

E-mail: yahya.kara@ostimteknik.edu.tr

• PhD : Budapest University of Technology and Economics
• MSc : Budapest University of Technology and Economics
• BSc : Ataturk University

Dr. Kara earned a B.Sc. in Mechanical Engineering from Ataturk University in 2016, MSc. in Mechanical Engineering Modelling from the Budapest University of Technology and Economics in 2018, and a Ph.D. in Mechanical Engineering from Budapest University of Technology and Economics in 2022. Dr. Kara has a proven track record of success developing polymeric nano-/submicron fibers, nanocomposites, and fiber-reinforced polymer composites for various engineering applications. He published highly impacted articles, books, chapters, and patents. Dr. Kara has many years of experience in industry-oriented research and development engineering projects. He is an expert in polymer science and engineering, designing and modeling fiber-reinforced polymer composites, nanocomposites, additive manufacturing, dynamic and static mechanical testing, impact testing, rheology, and polymeric materials characterization.

GOOGLE SCHOLAR LinkedIN

Assist. Prof. Dr. Celal Sami TÜFEKCİ

E-mail: celalsami.tufekci@ostimteknik.edu.tr

• PhD : 
• MSc : 
• BSc : 

Dr. TÜFEKCİ, who began his professional career as a Project Engineer at the Research Center of Pitney Bowes Inc., the world's leading communication and document creation company located in Shelton, Connecticut, USA, has made patented contributions to high-performance motion control. Serving as an expert in Mechatronics and Control System Design, he has provided consultancy for numerous projects and various companies. Following his role as a Satellite Design Expert for TÜRKSAT 3A (Launch/Ariane-5: June 12, 2008, Kourou, French Guiana) satellite production and technology transfer team at Thales Alenia Space (Cannes, France), he assumed the position of Director of National Communication Satellites Program at TÜRKSAT (Ankara, Turkey). Subsequently, he worked as a Chief Researcher at TÜBİTAK Space Technologies Research Institute (Ankara, Turkey), contributing to the RASAT (Launch/Dnepr: August 17, 2011, Yasny, Russia) and GÖKTÜRK-2 (Launch/LM2D: December 18, 2012, Jiuquan, China) Earth observation satellite projects.

In his academic career, he held positions such as Research Fellow at Rensselaer Polytechnic Institute (Troy, NY, USA); Deputy Chair of the Department of Mechanical Engineering at the University of Connecticut (Storrs, Connecticut, USA); Lecturer at the University of Ontario Institute of Technology (Oshawa, Ontario, Canada), Gazi University (Ankara, Turkey), and Atılım University (Ankara, Turkey); and most recently, he served as a Faculty Member and Center Research Laboratory Director in the Department of Mechatronics Engineering at Yıldız Technical University (Istanbul, Turkey).

Starting as the Head of Space Department at the Presidency of Defense Industries (Ankara, Turkey), Dr. TÜFEKCİ led the high-resolution GÖKTÜRK-1 (Launch/Vega: December 5, 2016, Kourou, French Guiana) Satellite Program and Satellite Launch Programs. He was later appointed as Vice President and continues to hold this position. Married and a father of three, TÜFEKCİ is highly proficient in English.

LinkedIN

Assist. Prof. Dr. Tolga DURSUN

E-mail: tolga.dursun@ostimteknik.edu.tr

• PhD : Gazi University
• MSc : Middle East Technical University
• BSc : Middle East Technical University

Dr. Tolga Dursun received his B.S. degree in Mechanical Engineering at Middle East Technical University (METU) in 1996. He received his M.Sc. degree with a thesis on correlations of ultrasonic sound attenuation and velocity with yield strength, fracture toughness and Young’s modulus in 1999 and his Ph.D. degree with a thesis on the failure analysis of bolted laminated composite plates in 2006 from Mechanical Engineering department of Gazi University. He has been working on R&D projects at defense industry for 25 years. His main research areas are mechanical behaviour of composite materials, dynamic behaviour of materials, finite element method, gun dynamics and mechanical vibrations.

GOOGLE SCHOLAR LinkedIN

Assist. Prof. Dr. Enes TAMDOĞAN 

E-mail: enes.tamdogan@ostimteknik.edu.tr 

• PhD : Özyeğin University
• MSc : Brandenburg Technical University
• BSc : Uludağ University

Enes Tamdoğan obtained his B.Sc. in Mechanical Engineering from Uludağ University in 2009 and completed his M.Sc. in Mechanical Engineering at Brandenburg University of Technology, Cottbus in 2011 with his thesis on “Numerical Study On Swirling Flows in a Pulverized Oxy-Coal Burner (Carbon Capture and Storage (CCS) Technology)”. There, he also focused on sustainable energy supply techniques beside of CCS Technologies. Then, he pursued his Ph.D. degree in Mechanical Engineering at Özyeğin University with research interests of cooling technologies (Direct-Indirect Liquid Cooling, etc) in electronics, heat transfer on structured surfaces, CFD analysis and experimental studies for single and multi phase Natural&Forced Convection problems. He also has worked as visiting researcher at Georgia Institute of Technology in Atlanta for three different projects. Thereafter, he has joined to TAI and established a heat transfer group working for TFX Engine and then moved with his group to TR Motor Propulsion Inc. Currently, he is working on gas turbine engine cooling technologies and dedicated his complete focus on turbine blade cooling problems.